The Guardian portable filtration system is a unique pump/motor/filter combination designed for conditioning and transferring petroleum-based and water emulsion fluids. It protects your system from contamination added with new fluid because new fluid is not necessarily clean fluid. Most new fluids right...

SPECIFICATIONS
Maximum Allowable Operating Pressure (MAOP): 50 psi (3.4 bar), Flow Capacity: up to 4 gpm (15 lpm), Maximum Recommended Fluid Viscosity: (.85 specific gravity) 110-120 VAC and 220-240 VAC 16,000 SUS / 24VDC 11,000 SUS, Warning: Explosion hazard. Do not pump flammable liquids such as gasoline,...

SPECIFICATIONS
Micron Rating: 5 (absolute), beta 1000 , Filter Media: Glass fiber elements (synthetic) , Diameter: 128 mm (5.06 in) , Length: 270 mm (10.63 in) , Element Thread: 1 1/2 - 16 UNF , Beta-Ratio: B3>200 3.8 , Dirt Holding Capacity: 102 g , Filtration Area: 8168 sq cm (1266 sq in)

SPECIFICATIONS
Micron Rating: 7 (absolute), beta 1000 , Filter Media: Glass fiber elements (synthetic) , Diameter: 128 mm (5.06 in) , Length: 270 mm (10.63 in) , Element Thread: 1 1/2 - 16 UNF , Beta-Ratio: B3>200 5.7 , Dirt Holding Capacity: 144 g , Filtration Area: 8168 sq cm (1266 sq in)

SPECIFICATIONS
Micron Rating: 12 (nominal), beta 1000 , Filter Media: paper, Diameter: 128 mm (5.06 in) , Length: 270 mm (10.63 in) , Element Thread: 1 1/2 - 16 UNF , Beta-Ratio: B>200 , 9.7 Dirt Holding Capacity: 170 g , Filtration Area: 6813 sq cm (1056 sq in)

SPECIFICATIONS
Micron Rating: 22 (nominal) Beta 1000, Filter Media: paper, Diameter: 128 mm (5.06 in) , Length: 270 mm (10.63 in) , Element Thread: 1 1/2 - 16 UNF , Beta-Ratio: B>200 - 18.2 , Dirt Holding Capacity: 179 g , Filtration Area: 6813 sq cm (1056 sq in)

SPECIFICATIONS
Water Removal, 25 micron, beta 75

SPECIFICATIONS
Micron Rating: 6 micron, Beta Ratio: Beta 1000, Length: 36 inch ( 91.50 cm), Outside Diameter: 6 inch ( 15.25 cm), Maximum Differential Pressure: 150 PSI, Maximum Flow Rate: 150 GPM ( 568 liter/minute), Maximum Viscosity that can be filtered: ISO 1000, Fluids that can be filtered: Oil, Synthetic...

SPECIFICATIONS
Micron Rating: 3 micron, Beta Ratio: Beta 1000, Length: 36 inch ( 91.50 cm), Outside Diameter: 6 inch ( 15.25 cm), Maximum Differential Pressure: 150 PSI, Maximum Flow Rate: 150 GPM ( 568 liter/minute), Maximum Viscosity that can be filtered: ISO 1000, Fluids that can be filtered: Oil, Synthetic...

SPECIFICATIONS
Micron Rating: 6 micron, Beta Ratio: Beta 1000, Length: 18 inch ( 45.75 cm), Outside Diameter: 6 inch ( 15.25 cm), Maximum Differential Pressure: 150 PSI, Maximum Flow Rate: 150 GPM ( 568 liter/minute), Maximum Viscosity that can be filtered: ISO 1000, Fluids that can be filtered: Oil, Synthetic...

The TS Series of filtration systems represent the highest quality and most rugged systems available for purifying all types of industrial oils. These heavy-duty systems are capable of removing particles and/or free water from all types of oil - even high viscosity gear oils - and are designed for years of...

SPECIFICATIONS
20 gpm pump / 3 hp electric motor, 230 vac, 60 hz, 1800 rpms, 16.8 amps, B1 Size - 50 Micron Bag Filter, 6x36 Cartridge - 7 µm Micro-Glass 6x36 Cartridge Filter ß7(c)=1000, 6x36 Cartridge - 2.5 µm Micro-Glass 6x36 Cartridge Filter ß2.5(c)=1000, Standard Sample Valve, Standard Y-Strainer, Black

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
5 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 3/4 inch connection - Fill: 1/2 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On - 7 µm Micro-Glass Filter ß7(c)=1000, 8 inch Spin-On - 5 µm Micro-Glass Filter ß5(c)=1000,...

SPECIFICATIONS
Filter Element -ß2000 Spin on - 4 Micron - 14.2 inch L

SPECIFICATIONS
Filter Element -ß2000 Spin on - 7 Micron - 14.2 inch L

SPECIFICATIONS
Filter Element -β2000 Spin on - 25 Micron - 14.2 inch L

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
4 gpm pump / 1 hp electric motor, 220 vac, 50 hz, 1425 rpms, 6.2 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On – Water Removal / 22 µm Micro-Glass Filter ß22(c)=1000, 8 inch Spin-On – 7 µm Micro-Glass...

Benefits: Proprietary filter media design ensures superior dirt rentation over other elements Internal O-Ring gasket eliminates leakage Viton seals offer the widest chemical compatibility

SPECIFICATIONS
5 inch x 14 inch, 4 micron filter element, (B4 = 2000), Desired Cleanliness Level (ISO code): 14/12/9 - 13/11/8

Benefits: Proprietary filter media design ensures superior dirt rentation over other elements Internal O-Ring gasket eliminates leakage Viton seals offer the widest chemical compatibility

SPECIFICATIONS
5 inch x 14 inch, 7 micron filter element, (B7 = 2000), Desired Cleanliness Level (ISO code): 18/16/13 - 15/13/10

Benefits: Proprietary filter media design ensures superior dirt rentation over other elements Internal O-Ring gasket eliminates leakage Viton seals offer the widest chemical compatibility

SPECIFICATIONS
5 inch x 14 inch, 10 micron filter element, (10 = 1000), Desired Cleanliness Level (ISO code): 19/17/14 - 18/16/13

Benefits: Proprietary filter media design ensures superior dirt rentation over other elements Internal O-Ring gasket eliminates leakage Viton seals offer the widest chemical compatibility

SPECIFICATIONS
5 inch x 14 inch, 25 micron filter element, (25 = 2000), Desired Cleanliness Level (ISO code): 20/18/15 - 19/17/14

Benefits: Proprietary filter media design ensures superior dirt rentation over other elements Internal O-Ring gasket eliminates leakage Viton seals offer the widest chemical compatibility

SPECIFICATIONS
5 inch x 14 inch, Water Removal

SPECIFICATIONS
2 Wheel hand Truck Unit, Single Depth Element GH134, 1HP motor TEFC, 5GPM w/ 150 PSI Relief Pressure switch for automated running (unit will shut down when element needs to be replaced), Pressure gauge, Flat Free Tires (Maintenance Free), Motor Starter with Start/Stop and Reset, Manual Bypass...

SPECIFICATIONS
2 Wheel hand Truck Unit, Dual Depth Elements GH134, 1HP motor TEFC, 5GPM w/ 150 PSI Relief, Pressure switch for automated running (unit will shut down when elements need to be replaced), Pressure gauge, Flat Free Tires (Maintenance Free), Motor Starter with Start/Stop and Reset, Manual Bypass...

SPECIFICATIONS
Water Removal Filter Element - B2000 spin on - 20 micron - 14.2 inch L

Benefits: Synthetic microfiber media offers a wide range of chemical compatibility Minimal pressure drop across a wide range of oil viscosities Universal connection makes it easily adaptable and equivalent to many OEM filters

SPECIFICATIONS
5.06 inch x 10.86 inches inch, 3 micron filter element, (B3 = 1000), Desired Cleanliness Level (ISO code): 14/12/9 - 13/11/8

Benefits: Synthetic microfiber media offers a wide range of chemical compatibility Minimal pressure drop across a wide range of oil viscosities Universal connection makes it easily adaptable and equivalent to many OEM filters

SPECIFICATIONS
5.06 inch x 10.86 inches inch, 6 micron filter element, (B6 = 1000), Desired Cleanliness Level (ISO code): 17/15/12 - 14/12/9

Benefits: Synthetic microfiber media offers a wide range of chemical compatibility Minimal pressure drop across a wide range of oil viscosities Universal connection makes it easily adaptable and equivalent to many OEM filters

SPECIFICATIONS
5.06 inch x 10.86 inches inch, 10 micron filter element, (B10 = 1000), Desired Cleanliness Level (ISO code): 18/16/13 - 17/15/12

Benefits: Synthetic microfiber media offers a wide range of chemical compatibility Minimal pressure drop across a wide range of oil viscosities Universal connection makes it easily adaptable and equivalent to many OEM filters

SPECIFICATIONS
5.06 inch x 10.86 inches inch, 25 micron filter element, (B25 = 1000), Desired Cleanliness Level (ISO code): 21/19/6 - 20/18/15

Benefits: Synthetic microfiber media offers a wide range of chemical compatibility Minimal pressure drop across a wide range of oil viscosities Universal connection makes it easily adaptable and equivalent to many OEM filters

SPECIFICATIONS
5.06 inch x 10.86 inches inch, Water Removal filter element, Desired Cleanliness Level (ISO code): Water removal

Benefits: Proprietary filter media design ensures superior dirt rentation over other elements Internal O-Ring gasket eliminates leakage Viton seals offer the widest chemical compatibility

SPECIFICATIONS
4.61 inch x 7.60 inch, 4 micron filter element, (B4 = 2000), Desired Cleanliness Level (ISO code): 14/12/9 - 13/11/8

Benefits: Proprietary filter media design ensures superior dirt rentation over other elements Internal O-Ring gasket eliminates leakage Viton seals offer the widest chemical compatibility

SPECIFICATIONS
4.61 inch x 7.60 inch, 7 micron filter element, (B7 = 2000), Desired Cleanliness Level (ISO code): 18/16/13 - 15/13/10

The Y2K HT-D Series Filter Cart is our signature filter cart and is an excellent choice for inchoff-line inch filtration in a wide variety of settings. Extremely mobile and lightweight, this filter cart has all the power needed for filtering oil viscosities up to 600cSt (ISO VG 680). This filter cart is...

SPECIFICATIONS
Dual 50 PSI Bypass Filter Heads With Color Coded Slide Type Differential Pressure Indicators, 7 Micron Beta 2000 First Stage P1065, 4 Micron Beta 2000 Second Stage P1066, 5 GPM Heavy Duty Cast Iron Pump, 1HP Motor TEFC, 115VAC, 10 ft Suction 3/4 inch PVC Type Hose With ISO B Quick Disconnects And...

When you need to install a permanent, continuous duty solution for your offline filtration, the PU-D Panel Unit is the perfect solution. Available in a variety of sizes, it will suit any space requirement you may have. These filtration systems have all the power needed for filtering oil viscosities up to...

SPECIFICATIONS
Heavy Duty Panel Unit, Dual 50 PSI Bypass Filter Heads W/ Pop-up Differential Pressure Indicators, 6 Micron Beta 1000 First Stage P1069, 3 Micron Beta 1000 Second Stage P1068, 1HP Motor TEFC 110VAC, 5 GPM Heavy-Duty Cast-Iron Gear Pump W/ 150 PSI Relief Valve, On/Off Motor Starter, No Hoses & No...

Industry spends millions of dollars annually treating the negative effects of contamination caused by dirt and moisture, such as excess machine wear, production downtime, and repair costs. Whether you have an application that needs regular filtration, or a maintenance location where you bring equipment to...

SPECIFICATIONS
Pump: 5gpm Electric Pump - 115vac, 60 hz , Filter A: 6 micron Particulate Filter , Filter B: 3 micron Particulate Filter , Sample Port: Standard Sample Port , Relief Valve: Safety Relief Valve , Oil Cooler: No Oil Cooler, Temperature Gauge: none, Bypass Valve: Yes , Color: Yellow, NOTE: ...

The purpose of the FD-5 Vacuum Dehydration System is to serve as an oil treatment system. By removing water (dissolved, emulsified and free), gasses and solid contaminants the oil can return to its original condition, and be reused in lubricating systems. Having clean, dry oil will allow hydraulic and...

SPECIFICATIONS
Flow Rate:5 GPM Vacuum Pump Flow Rate:13 CFM Heater Capacity:3KW @ 15wsi Motors:3 HP, 480 VAC, 3 Phase; Other voltages are available Plumbing Requirements:Inlet: 1 1/2 inch FNPT; Outlet: 1 1/2 inch FNPT Approximate Dry Weight:950 lbs Dimensions:44 inchL x 30.5 inchW x 68 inchH Start Up...

Perfect for situations with minimal storage space, the FP-D FilterPak combines style and convenience in a compact design that allows the operator to carry it just about anywhere. This powerhouse has the ability to filter oil viscosities up to 600cSt (ISO VG 680) at 100°F within ambient temperature ranges of...

SPECIFICATIONS
Aluminum Compact Light Weight Filter Pak Handheld, Single 50 PSI Bypass Filter Head W/ Color Coded Differential Pressure Indicator, 7 Micron Beta 2000 P1065, 1HP Motor TEFC 110VAC, 5 GPM Heavy Duty Cast Iron Gear Pump W/ 150 PSI Relief Valve, 7 ft Suction Clear PVC Hose W/ ISO B Quick Disconnect (...

Our dedicated by-pass filtration systems far exceed industry standards, filtering down to 1 micron will maintain cleanliness levels several grades cleaner than brand new oil, dramatically extending the life of lubricated components and oil. Increased filtration accuracy prevents wear in hydraulic, gear...

SPECIFICATIONS
Dual Canister 4 Wheel Mobile Unit, Includes Fork Pockets for transport, Dual Handle Lid (Aluminum, Anodized) With Air Drain, 1HP Motor TEFC 110VAC, 5GPM Heavy Duty Cast Iron Gear Pump W/ 150 PSI Relief Valve Suction Inlet Strainer, Visual Flow Meter 0-5 GPM, Push Button Sample Port (Up-Stream...

SPECIFICATIONS
Water Removal

SPECIFICATIONS
Micron Rating: 2.5 (absolute), beta 1000 , Filter Media: Glass fiber elements (synthetic) , Diameter: 128 mm (5.06 in) , Length: 270 mm (10.63 in) , Element Thread: 1 1/2 - 16 UNF , Beta-Ratio: B3>200 -

SPECIFICATIONS
Micron Rating: 2.5 (absolute), Filter Media: Glass fiber elements (synthetic), Diameter: 128 mm (5.06 in), Length: 168 mm (6.63 in), Element Thread: 1 1/2 - 16 UNF, Beta-Ratio: B>200 -

The purpose of the FD-5 Vacuum Dehydration System is to serve as an oil treatment system. By removing water (dissolved, emulsified and free), gasses and solid contaminants the oil can return to its original condition, and be reused in lubricating systems. Having clean, dry oil will allow hydraulic and...

SPECIFICATIONS
Water and Particulate Removal System - 50 GPM- 7 (NEMA 7 Rated), Class 1, Div. 2, Groups B,C&D hazardous locations, Flow Rate - 50 GPM, Pre-Filtration -(Inlet BASKET Strainer 20 Mesh), Filtration - Equipped With An Industry Standard Absolute Rated Micro-Glass Filter Element In A Hydraulic Filter...

The FlowGuard drum topper is a portable filtration unit with many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment

SPECIFICATIONS
3.5 gpm, .25 hp electric motor, 115 vac, 1725 rpms, 5 amps, electric 60 Hz motor base model (for low viscosity oils up to ISO VG 100) with standard features of 1 inch and 3/4 inch ISO B quick connects, 6 ft hoses, manual filter bypass, sample valves and dual-stage filtration

Buna O-Ring Seals for 6x36 TC Cart Cannister

SPECIFICATIONS
Buna O-Ring Seals for 6x36 TC Cart Cannister

Industry spends millions of dollars annually treating the negative effects of contamination caused by dirt and moisture, such as excess machine wear, production downtime, and repair costs. Whether you have an application that needs regular filtration, or a maintenance location where you bring equipment to...

SPECIFICATIONS
1 gpm, 60 hz electric motor base model (for high viscosity oils up to ISO VG 460) with single-stage filtration

SPECIFICATIONS
15 GPM Vacuum Dehydration System, 460VAC, 3P (Customer to wire power into electrical enclosure), 3 Micron Beta 1000 Filter Element, 22-27 inch Operational Vacuum, 18KW Heater, Forklift skid with Drip Tray and Drain, Inlet Suction Strainer, (2) 1-1/2 suction and discharge hoses with cam-lock ends...

Industry spends millions of dollars annually treating the negative effects of contamination caused by dirt and moisture, such as excess machine wear, production downtime, and repair costs. Whether you have an application that needs regular filtration, or a maintenance location where you bring equipment to...

SPECIFICATIONS
3.5 gpm, .25 hp, 230 vac, 60 hz, 1725 rpms, 2.5 amps, 60 hz electric motor base model (for low viscosity oils up to ISO VG 100) with single-stage filtration and sample valves

SPECIFICATIONS
Replacement filter for TS Series

SPECIFICATIONS
Replacement filter for TS Series

SPECIFICATIONS
Replacement filter for TS Series

SPECIFICATIONS
Replacement filter for TS Series

SPECIFICATIONS
Replacement filter for TS Series

The Y2K HT-D Series Filter Cart is our signature filter cart and is an excellent choice for inchoff-line inch filtration in a wide variety of settings. Extremely mobile and lightweight, this filter cart has all the power needed for filtering oil viscosities up to 600cSt (ISO VG 680). This filter cart is...

SPECIFICATIONS
2 Wheeled Hand Truck Filter Cart, Flat/Maintenance Free Tires, Dual 50 PSI Bypass Filter Heads W/ Color Coded Differential Pressure Indicators, Water Removal First Stage P1048WR, 10 Micron Beta 1000 Second Stage P1063, 2 inch Lipped Drip Pan Under The Elements, 1HP Motor TEFC 110VAC, 2 GPM Heavy...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On – 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On – 5 µm Micro-Glass Filter ß5(c)=1000,...

The FlowGuard drum topper is a portable filtration unit with many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment

SPECIFICATIONS
1 gpm, .25 hp electric motor, 230 vac, 1725 rpms, 2.5 amps, electric 60 Hz motor base model (for high viscosity oils up to ISO VG 460) with standard features of 1 inch and 3/4 inch ISO B quick connects, 6 ft hoses, and dual-stage filtration

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 8 inch Spin-On - 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On - 7 µm Micro-Glass Filter ß7(c)=1000, Manual Filter Bypass...

The FlowGuard drum topper is a portable filtration unit with many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment

SPECIFICATIONS
1 gpm, .25 hp electric motor, 230 vac, 1725 rpms, 2.5 amps, electric 60 Hz motor base model (for high viscosity oils up to ISO VG 460) with standard features of 1 inch and 3/4 inch ISO B quick connects, 6 ft hoses, and dual-stage filtration

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
5 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, Flush Face Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On – Water Removal / 22 µm Micro-Glass Filter ß22(c)=1000, 8 inch Spin-On – 5 µm...

SPECIFICATIONS
Replacement filter for TS Series

SPECIFICATIONS
Replacement filter for TS Series

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 8 inch Spin-On - 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On - 7 µm Micro-Glass Filter ß7(c)=1000, No Filter Bypass Valve,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
Flow Rate: 8 gpm, Power Supply: 1.7HP Air Motor, 0-3000 rpms, Hose End Connections: ISO B Coupler - NPT, Hose End Connection Sizes Drain: 1 inch hose & connection - Fill: 3/4 inch hose & connection Filter A: 22 Micron Water Removal, Filter B: 5 Micron Micro-Glass Particulate Filter, Filter Bypass...

The HT-M Series filter cart is a great choice for inchoff-line inch filtration in a wide variety of settings. Extremely mobile and light weight, this filter cart has the ability to filter oil viscosities up to 600cSt (ISO VG 680) at 100F within ambient temperature ranges of -15F to 150F. All Y2K products...

SPECIFICATIONS
** SPECS REQUIRE UPDATE **, 2 Wheeled Hand Truck Filter Cart, Flat/Maintenance Free Tires, Dual 50 PSI Bypass Filter Heads W/ Pop-up Differential Pressure Indicators, 10 Micron Beta 1000 First Stage P1070, 6 Micron Beta 1000 Second Stage P1069, 2 inch Lipped Drip Pan Under The Elements, 1HP...

The HT-M Series filter cart is a great choice for inchoff-line inch filtration in a wide variety of settings. Extremely mobile and light weight, this filter cart has the ability to filter oil viscosities up to 600cSt (ISO VG 680) at 100F within ambient temperature ranges of -15F to 150F. All Y2K products...

SPECIFICATIONS
** SPECS REQUIRE UPDATE **, 2 Wheeled Hand Truck Filter Cart, Flat/Maintenance Free Tires, Dual 50 PSI Bypass Filter Heads W/ Pop-up Differential Pressure Indicators, 6 Micron Beta 2000 First Stage P1069, 3 Micron Beta 2000 Second Stage P1068, 2 inch Lipped Drip Pan Under The Elements, 1HP Motor...

SPECIFICATIONS
Replacement filter for TS Series

When you need to remove large amounts of water from your reservoirs, but the lack of portability and electrical requirements of a conventional VAC Dehydration system hinders your efforts, we have got you covered. Built with your needs in mind, we designed a unit that is portable and easy to get around while...

SPECIFICATIONS
Carbon steel frame with drip tray; no flat tires, Multiple color options available, 1 HP, 115 Vac, 60 Hz, Dual stage, medium pressure, steel heads, Heavy duty, steel gear pump. Available in 2 GPM, Various quick connect options available, 2 ea, 7ft, Clear PVC, steel reinforced suction and discharge...

SPECIFICATIONS
Replacement filter for TS Series

SPECIFICATIONS
Replacement filter for TS Series

Single piece, water absorption element (watersorb)

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1.7 hp air motor, 0-3000 rpms, ISO B Coupler - NPT, Drain: 3/4 inch connection - Fill: 1/2 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On – 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On – 7 µm Micro-Glass Filter ß7(c)=1000, Manual Filter Bypass...

Refillable breather with ZR gel~ Typical Applications: Mobile & off-road equipment~ Hydraulics~ Nautical applications~ Truck differentials

SPECIFICATIONS
Filter Media: Glass Fiber, Hydrophilic Media: ZR Gel, All Other Components: Copolyester, Buna-N, Stainless steel, Temperature Range: -40°F to 194°F (-40°C to 90°C), Filter Efficiency: 3 µm absolute ( ß3 = 200), Adsorption Material: ZR Gel 3-6 mm, ZR Gel Volume: 300 cc, Amount of Desiccant:...

Our dedicated by-pass filtration systems far exceed industry standards, filtering down to 1 micron will maintain cleanliness levels several grades cleaner than brand new oil, dramatically extending the life of lubricated components and oil. Increased filtration accuracy prevents wear in hydraulic, gear and...

SPECIFICATIONS
HZ : 60, HP/KW 1/0.75, RPM 1725, Voltage 115/230

Off-Line Unit, single housing, pump/motor

SPECIFICATIONS
2.1 lpm/ 0.55 gpm, 110 VAC 60Hz , 1-phase, incl. 1 Cellulose element (30HB), visual indicator, mounting plate and single-stage (parallel) filtration Replacement

The FlowGuard drum topper is a portable filtration unit with many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment

SPECIFICATIONS
8 gpm pump / 1.7 hp air motor, 0-3000 rpms, with standard features of 1 inch and 3/4 inch ISO B quick connects, 6 ft hoses, manual filter bypass, sample valves and dual-stage filtration

GOLD GEAR 50 SIZE ELEMENT

O Rings

Vacuum Pump Exhaust Separator

SPECIFICATIONS
Vacuum Pump Exhaust Separator

The HT-M Series filter cart is a great choice for inchoff-line inch filtration in a wide variety of settings. Extremely mobile and light weight, this filter cart has the ability to filter oil viscosities up to 600cSt (ISO VG 680) at 100F within ambient temperature ranges of -15F to 150F. All Y2K products...

SPECIFICATIONS
** SPECS REQUIRE UPDATE **, 2 Wheeled Hand Truck Filter Cart, Flat/Maintenance Free Tires, Dual 50 PSI Bypass Filter Heads W/ Pop-up Differential Pressure Indicators, 6 Micron Beta 2000 First Stage P1069, 3 Micron Beta 2000 Second Stage P1068, 2 inch Lipped Drip Pan Under The Elements, 1HP Motor...

Single canister, stationary filter system designed to filter a refrigeration compressor (NH3, Freon, etc.), using the compressors pressure differential to generate oil flow. Removes up to 12-14 pounds of solids from 1-3 microns and above and up to 5 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Refrigeration Compressor, Oil Reservoir Size (gallons): 1 to 120, Motor Power: N/A, Pump: N/A, Inlet Port: 1/2 inch FNPT, Outlet Port: 1/2 inch FNPT, Dimensions: 21 inchW x 43 inchH x 17 inchD

Two canister, stationary filter system designed to filter a refrigeration compressor (NH3, Freon, etc.), using the compressors pressure differential to generate oil flow. Removes up to 24-28 pounds of solids from 1-3 microns and above and up to 10 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Refrigeration Compressor, Oil Reservoir Size (gallons): 121 to 240, Motor Power: N/A, Pump: N/A, Inlet Port: 1/2 inch FNPT, Outlet Port: 1/2 inch FNPT, Dimensions: 31 inchW x 43 inchH x 17 inchD

Three canister, stationary filter system designed to filter a refrigeration compressor (NH3, Freon, etc.), using the compressors pressure differential to generate oil flow. Removes up to 36-42 pounds of solids from 1-3 microns and above and up to 15 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Refrigeration Compressor, Oil Reservoir Size (gallons): 241 to 360, Motor Power: N/A, Pump: N/A, Inlet Port: 1/2 inch FNPT, Outlet Port: 1/2 inch FNPT, Dimensions: 43 inchW x 43 inchH x 18 inchD

Single canister, stationary filter system designed to filter an air compressor, using the compressors pressure differential to generate oil flow. Removes up to 12-14 pounds of solids from 1-3 microns and above and up to 5 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Air Compressor, Oil Reservoir Size (gallons): 1 to 60, Motor Power: N/A, Pump: N/A, Inlet Port: 1/2 inch FNPT, Outlet Port: 1/4 inch FNPT, Dimensions: 18.5 inchW x 46.5 inchH x 16.5 inchD

Single canister, stationary filter system designed to filter hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 12-14 pounds of solids and up to 5 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 1 to 150, Motor Power: 1/3HP, 120V, 1PH: 5.2 A, Motor Power: 1/3HP, 460V, 3PH: 0.8 A, Pump: 1/2 to 2 GPM, Inlet Port: 1/2 inch FNPT, Outlet Port: 1/2 inch FNPT, Dimensions: 24 inchW x 47 inchH x 19 inchD

Two canister, stationary filter system designed to filter hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 24-28 pounds of solids and up to 10 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 151 to 300, Motor Power: 1/2HP, 120V, 1PH: 7.4 A, Motor Power: 1/2HP, 460V, 3PH: 1.0 A, Pump: 1 to 4 GPM, Inlet Port: 3/4 inch FNPT, Outlet Port: 3/4 inch FNPT, Dimensions: 31 inchW x 48 inchH x 23 inchD

Three canister, stationary filter system designed to filter hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 36-42 pounds of solids and up to 15 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 301 to 600, Motor Power: 3/4HP, 120V, 1PH: 8.4 A, Motor Power: 3/4HP, 460V, 3PH: 1.5 A, Pump: 2 to 6 GPM, Inlet Port: 3/4 inch FNPT, Outlet Port: 3/4 inch FNPT, Dimensions: 43 inchW x 48 inchH x 24 inchD

Single canister, stationary filter system designed to filter large hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 60 pounds of solids and up to 24 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 601 to 900, Motor Power: 1HP, 3Phase, 230/460 V, 3.2/1.6 A, Pump: 10 GPM, Inlet Port: 1 inch FNPT, Outlet Port: 3/4 inch FNPT, Dimensions: 35 inchW x 60 inchH x 29 inchD (without Boom - Height with Boom is 106 inch)

Two canister, stationary filter system designed to filter large hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 120 pounds of solids and up to 48 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 901 to 1,800, Motor Power: 2HP, 3Phase, 230/460 V, 5.8/2.9 A, Pump: 20 GPM, Inlet Port: 1-1/4 inch FNPT, Outlet Port: 1 inch FNPT, Dimensions: 55 inchW x 58 inchH x 42 inchD (without Boom - Height with Boom is 106 inch)

Three canister, stationary filter system designed to filter large hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 180 pounds of solids and up to 72 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 1,801 to 2,700, Motor Power: 3HP, 3Phase, 230/460 V, 8.4/4.2 A, Pump: 30 GPM, Inlet Port: 1-1/2 inch FNPT, Outlet Port: 1 inch FNPT, Dimensions: 76 inchW x 59 inchH x 42 inchD (without Boom - Height with Boom is 106 inch)

Four canister, stationary filter system designed to filter large hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 240 pounds of solids and up to 96 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Hydraulic, Turbine, Oil Reservoir Size (gallons): 2,701 to 3,600, Motor Power: 5HP, 3Phase, 230/460 V, 13.4/6.7 A, Pump: 40 GPM, Inlet Port: 2 inch FNPT, Outlet Port: 1 1/4 inch FNPT, Dimensions: 92 inchW x 58 inchH x 50 inchD (without Boom - Height with Boom is 106 inch)

Six canister, stationary filter system designed to filter large hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 360 pounds of solids and up to 144 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Hydraulic, Turbine, Oil Reservoir Size (gallons): 4,501 to 5,600, Motor Power: 5HP, 3Phase, 230/460 V, 13.4/6.7 A, Pump: 60 GPM, Inlet Port: 3 inch FNPT, Outlet Port: 1 1/2 inch FNPT, Dimensions: TBD (without Boom - Height with Boom is 106 inch)

Single canister, stationary, fully stainless steel, rated for use in wash-down areas filter system designed to filter hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 12-14 pounds of solids and up to 5 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 1 to 150, Motor Power: 1/2HP, 460V, 3PH: 0.9 A, Pump: 1/2 to 2 GPM, Inlet Port: 1/2 inch FNPT, Outlet Port: 1/2 inch FNPT, Dimensions: 25 inchW x 47.5 inchH x 19.5 inchD

Single canister, portable, 2-wheel filter cart system designed to filter hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 12-14 pounds of solids and up to 5 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 1 to 150, Motor Power: 1/2HP, 120V, 1PH: 7.0 A, Pump: 4 GPM, Inlet Port: 3/4 inch FNPT, Outlet Port: 3/4 inch FNPT, Dimensions: 18.5 inchW x 46.5 inchH x 26 inchD

Two canister, portable, 2-wheel filter cart system designed to filter hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 24-28 pounds of solids and up to 10 quarts of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 1 to 300, Motor Power: 3/4HP, 120V, 1PH: 8.4 A, Pump: 6 GPM, Inlet Port: 3/4 inch FNPT, Outlet Port: 3/4 inch FNPT, Dimensions: 24.5 inchW x 46.5 inchH x 26 inchD

Single canister, handheld, portable filter system designed to filter small hydraulic, gear or turbine oil reservoirs. Uses a pump and motor to generate oil flow. Removes up to 4 pounds of solids and up to 1 quart of moisture before a filter change is needed.

SPECIFICATIONS
Equipment: Gearbox, Hydraulic, Turbine, Oil Reservoir Size (gallons): 1 to 60, Motor Power: 1/3HP, 120V, 1PH: 5.2 A, Pump: 1 GPM, Inlet Port: 3/4 inch FNPT, Outlet Port: 3/4 inch FNPT, Dimensions: 12 inchW x 29.5 inchH x 17.5 inchD

Includes AFA-2 filter element, inside the USPI 1000AMM canister spring assembly rubber flat gasket and USPI 1000AMM canister lid O-ring; Removes solids 1-3 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Refrigeration Compressor

Includes AFA-2 filter element, inside the USPI 1000H/C or 88 series canister T-handle rubber flat gasket and USPI 1000H/C or 88 series canister lid O-ring; Removes solids 1-3 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Air Compressor, Hydraulic and Turbine Up to ISO VG 100 Oil

Includes GO-4 filter element, inside the USPI 88 series canister T-handle rubber flat gasket and USPI 88 series canister lid O-ring; Removes solids 3-5 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Gearboxes ISO VG 150 to 320 Gear Oil

Includes GO-6 filter element, inside the USPI 88 series canister T-handle rubber flat gasket and USPI 88 series canister lid O-ring; Removes solids 5-8 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Gearboxes ISO VG 320 to 460 Gear Oil

Includes GO-8 filter element, inside the USPI 88 series canister T-handle rubber flat gasket and USPI 88 series canister lid O-ring; Removes solids 8-10 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Gearboxes ISO VG 460 to 680 Gear Oil

Includes LVO-2 filter element, inside the USPI 88 series canister T-handle rubber flat gasket and USPI 88 series canister lid O-ring; Removes solids 0.5 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Air Compressor, Hydraulic and Turbine Up to ISO VG 32 Oil

Includes a case of (3) 500AFA-3 filter elements, inside the USPI 98 series canister spring assembly rubber flat gasket and USPI 98 series canister lid O-ring; Removes solids 1-3 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Hydraulic and Turbine Up to ISO VG 100

Includes a case of (6) 15HYD-2 filter elements, (6) inside the USPI 150HH canister T-handle rubber flat gasket and (6) USPI 150HH canister lid O-ring; Removes solids 1-3 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Hydraulic and Turbine Up to ISO VG 100

Includes a case of (6) 15GO-2 filter elements, (6) inside the USPI 150HH canister T-handle rubber flat gasket and (6) USPI 150HH canister lid O-ring; Removes solids 3-5 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Gearboxes ISO VG 150 to 320 Gear Oil

Includes a case of (6) 15GO-4 filter elements, (6) inside the USPI 150HH canister T-handle rubber flat gasket and (6) USPI 150HH canister lid O-ring; Removes solids 5-8 microns and above; Removes moisture

SPECIFICATIONS
Equipment: Gearboxes ISO VG 320 to 460 Gear Oil

Perfect for situations with minimal storage space, the FP-D FilterPak combines style and convenience in a compact design that allows the operator to carry it just about anywhere. This powerhouse has the ability to filter oil viscosities up to 600cSt (ISO VG 680) at 100°F within ambient temperature ranges of...

SPECIFICATIONS
Aluminum Compact Light Weight Filter Pak Handheld, Single 50 PSI Bypass Filter Heads W/ Color Coded Differential Pressure Indicator, 10 Micron Beta 1000 P1063, 1HP Motor TEFC 110VAC, 2 GPM Heavy Duty Cast Iron Gear Pump W/ 150 PSI Relief Valve, 7 ft Suction & Discharge Clear PVC Hoses W/ Camlock...

Gold Gear Oil 6 Segment Element

Hydraulic 100 Series: 2 Segment Filter Element

Hydraulic 25 Series: 1 Segment Hydraulic Filter Element

Hydraulic 50 Series: 2 Segment Filter Element

Preventing contamination damage saves significant time, money and resources. Designed for low pressure systems, the GLP units remove large particles, fiber, sludge and water, but we don ftt stop there - the GLP fts also inchpolish inch the fluid by removing silt and fine particles down to 1...

SPECIFICATIONS
OVERALL DIMENSIONS (W x L x H): 8” x 11” x 15”, NET WEIGHT (w/element) : 17 lbs (7.7 kgs), FILTER HOUSINGS: 1, RESERVOIR CAPACITY: 15 gal* (57 liters), DIRT HOLDING CAPACITY: 1.25 lbs, WATER HOLDING CAPACITY: 0.25 gallon, HOUSING OIL CAPACITY: 5 quarts, INLET DIAMETER: #6 JIC male,...

Preventing contamination damage saves significant time, money and resources. Designed for low pressure systems, the GLP units remove large particles, fiber, sludge and water, but we don ftt stop there - the GLP fts also inchpolish inch the fluid by removing silt and fine particles down to 1...

SPECIFICATIONS
OVERALL DIMENSIONS (W x L x H): 11” x 13” x 28”, NET WEIGHT (w/element) : 40 lbs (18.2 kgs), FILTER HOUSINGS: 1, RESERVOIR CAPACITY: 60 gal* (228 liters), DIRT HOLDING CAPACITY: 5 lbs, WATER HOLDING CAPACITY: 1 gallon, HOUSING OIL CAPACITY: 20 quarts, INLET DIAMETER: #8 JIC male, OUTLET...

30263 USPI Engine Oil Filtration System

Platform Unit

SPECIFICATIONS
Lubrigard Custom Platform Filtration Unit, 115 Gallon Translucent Poly Tank With Level Indication, Fork Lift Pockets (No Wheels), Dual 50 PSI Bypass Filter Heads W/ Color Coded Differential Pressure Indicators, Water Removal First Stage P1048WR, 7 Micron Beta 2000 P1065, 1.5 HP Air Operated Motor,...

STANDARD 18IN CONTACTOR

AIR DRYER ASSEMBLY

SPECIFICATIONS
15 GPM Vacuum Dehydration System, 460VAC, 3P (Customer to wire power into electrical enclosure), 3 Micron Beta 1000 Filter Element, 22-27 inch Operational Vacuum, 18KW Heater, Forklift skid with Drip Tray and Drain, Inlet Suction Strainer, (2) 1-1/2 suction and discharge hoses with cam-lock ends...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On – 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On – 5 µm Micro-Glass Filter ß5(c)=1000,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On – 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On – 5 µm Micro-Glass Filter ß5(c)=1000,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On - 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On - 5 µm Micro-Glass Filter ß5(c)=1000,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On - 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On - 5 µm Micro-Glass Filter ß5(c)=1000,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On – 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On – 5 µm Micro-Glass Filter ß5(c)=1000,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On - 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On - 5 µm Micro-Glass Filter ß5(c)=1000,...

Compact and portable, the DTD Drum Topper is designed to fit perfectly on top of a 55-gallon drum. When portability and convenience is of the utmost importance, the Drum Topper has your back. With the ability to be used horizontally or vertically, our drum topper is the most versatile in the industry. It has...

SPECIFICATIONS
2 GPM, 1HP Motor, Standard 7 ft Hoses (3/4 inch & 1/2 inch), Standard ISO B QD fts (3/4 inch & 1/2 inch), 2 ea. 5 inchx14 inch Elements, Internal Pump Bypass, 4 ft Electric Cord, Toggle On/Off Switch, Explosion Proof, Parallel Filter Heads,

The Y2K HT-D Series Filter Cart is our signature filter cart and is an excellent choice for inchoff-line inch filtration in a wide variety of settings. Extremely mobile and lightweight, this filter cart has all the power needed for filtering oil viscosities up to 600cSt (ISO VG 680). This filter cart is...

SPECIFICATIONS
Lubrigard 2 Wheeled Hand Truck Filter Cart, Flat/Maintenance Free Tires, Dual 50 PSI Bypass Filter Heads W/ Color Coded Differential Pressure Indicators, Water Removal First Stage P1048WR, 10 Micron Beta 1000 Second Stage P1063, 2 inch Lipped Drip Pan Under The Elements, 1HP 110V Explosion Proof...

While Des-Case fts FlowGuard standard line of fluid handling solutions can be easily customized and quickly delivered to meet a wide variety of applications, some situations demand even more. For those challenged with high flow, high viscosity, and/or explosion-proof requirements, Des-Case specialty...

SPECIFICATIONS
0 gpm pump / 4 hp pneumatic motor, 0-3000 rpms, 6x36 Cartridge - Water Removal / 22 µm Micro-Glass 6x36 Cartridge Filter ß22(c)=1000, 6x36 Cartridge - 7 µm Micro-Glass 6x36 Cartridge Filter ß7(c)=1000, None, High Viscosity Sample Valve, Standard Y-Strainer, Black, 2 Wheel Frame

Refillable breather with ZR gel~ Typical Applications: Mobile & off-road equipment~ Hydraulics~ Nautical applications~ Truck differentials

SPECIFICATIONS
Filter Media: Glass Fiber, Hydrophilic Media: ZR Gel, All Other Components: Copolyester, Buna-N, Stainless steel, Temperature Range: -40°F to 194°F (-40°C to 90°C), Filter Efficiency: 3 µm absolute ( ß3 = 200), Adsorption Material: ZR Gel 3-6 mm, ZR Gel Volume: 300 cc, Amount of Desiccant:...

SPECIFICATIONS
Micron Rating: 3 micron, Beta Ratio: Beta 1000, Length: 18 inch ( 45.75 cm), Outside Diameter: 6 inch ( 15.25 cm), Maximum Differential Pressure: 150 PSI, Maximum Flow Rate: 150 GPM ( 568 liter/minute), Maximum Viscosity that can be filtered: ISO 1000, Fluids that can be filtered: Oil, Synthetic...

When you need to install a permanent, continuous duty solution for your offline filtration, the PU-D Panel Unit is the perfect solution. Available in a variety of sizes, it will suit any space requirement you may have. These filtration systems have all the power needed for filtering oil viscosities up to...

SPECIFICATIONS
Heavy Duty Panel Unit, Dual 50 PSI Bypass Filter Heads W/ Slide Type Color Coded Differential Pressure Indicators, Water Removal First Stage P1048WR, 10 Micron Beta 1000 Second Stage P1063, 1HP Motor TEFC 110VAC, 1 GPM Heavy-Duty Cast-Iron Gear Pump W/ 150 PSI Relief Valve, 7 ft Suction &...

MAGNETIC PRE-FILTER ASSEMBLY RETROFIT KIT FOR LG-HTM1062SH1SQ140R1-OS SERIAL NO: 2084947-01

When you need to install a permanent, continuous duty solution for your offline filtration, the PU-D Panel Unit is the perfect solution. Available in a variety of sizes, it will suit any space requirement you may have. These filtration systems have all the power needed for filtering oil viscosities up to...

SPECIFICATIONS
Custom Panel Unit, Single 50 PSI Bypass Filter Heads W/ Color Coded Differential Pressure Indicator, 7 Micron Beta 2000 P1065, 2HP 480V 3PH Exp Proof Motor, *Motor comes not wired and without a switch or plug. Customer responsible for final wiring and safety check*, 2GPM High Viscosity Pump,...

The Guardian portable filtration system is a unique pump/motor/filter combination designed for conditioning and transferring petroleum-based and water emulsion fluids. It protects your system from contamination added with new fluid because new fluid is not necessarily clean fluid. Most new fluids right...

SPECIFICATIONS
Maximum Allowable Operating Pressure (MAOP): 50 psi (3.4 bar) , Flow Capacity: Up to 4 gpm (15 lpm), Maximum Recommended Fluid Viscosity: (.85 specific gravity) 110-120 VAC and 220-240 VAC -16,000 SUS 24 VDC - 11,000 SUS, Warning: Explosion hazard. Do not pump flammable liquids such as gasoline,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
5 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 3/4 inch connection - Fill: 1/2 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On - 7 µm Micro-Glass Filter ß7(c)=1000, 8 inch Spin-On - 5 µm Micro-Glass Filter ß5(c)=1000,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
5 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 3/4 inch connection - Fill: 1/2 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On - 7 µm Micro-Glass Filter ß7(c)=1000, 8 inch Spin-On - 5 µm Micro-Glass Filter ß5(c)=1000,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
5 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 3/4 inch connection - Fill: 1/2 inch connection **Hoses are 1 inch, 3/4 inch respectively, 8 inch Spin-On - 7 µm Micro-Glass Filter ß7(c)=1000, 8 inch Spin-On - 5 µm Micro-Glass Filter ß5(c)=1000,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 8 inch Spin-On - 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On - 7 µm Micro-Glass Filter ß7(c)=1000, No Filter Bypass Valve,...

Des-Case Corporation introduced its latest offering in the FlowGuard™ line of fluid handling products today. The FlowGuard™ Filter Cart is a customizable, all-in-one filtration system built upon a rugged powder-coated dolly. The cart filters and transfers oil from lubricated systems, while removable...

SPECIFICATIONS
2 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler - NPT, Drain: 1 inch connection - Fill: 3/4 inch connection **Hoses are 1 inch, 8 inch Spin-On - 12 µm Micro-Glass Filter ß12(c)=1000, 8 inch Spin-On - 7 µm Micro-Glass Filter ß7(c)=1000, No Filter Bypass Valve,...