VACUUM DEHYDRATION

The purpose of the FD-5 Vacuum Dehydration System is to serve as an oil treatment system. By removing water (dissolved, emulsified and free), gasses and solid contaminants the oil can return to its original condition, and be reused in lubricating systems. Having clean, dry oil will allow hydraulic and...

SPECIFICATIONS
Flow Rate:5 GPM Vacuum Pump Flow Rate:13 CFM Heater Capacity:3KW @ 15wsi Motors:3 HP, 480 VAC, 3 Phase; Other voltages are available Plumbing Requirements:Inlet: 1 1/2 inch FNPT; Outlet: 1 1/2 inch FNPT Approximate Dry Weight:950 lbs Dimensions:44 inchL x 30.5 inchW x 68 inchH Start Up...

The purpose of the FD-5 Vacuum Dehydration System is to serve as an oil treatment system. By removing water (dissolved, emulsified and free), gasses and solid contaminants the oil can return to its original condition, and be reused in lubricating systems. Having clean, dry oil will allow hydraulic and...

SPECIFICATIONS
Water and Particulate Removal System - 50 GPM- 7 (NEMA 7 Rated), Class 1, Div. 2, Groups B,C&D hazardous locations, Flow Rate - 50 GPM, Pre-Filtration -(Inlet BASKET Strainer 20 Mesh), Filtration - Equipped With An Industry Standard Absolute Rated Micro-Glass Filter Element In A Hydraulic Filter...

The purpose of the FD-15 Vacuum Dehydration System is to serve as an oil treatment system. By removing water (dissolved, emulsified and free), gasses and solid contaminants the oil can return to its original condition, and be reused in lubricating systems. Having clean, dry oil will allow hydraulic and...

SPECIFICATIONS
Flow Rate: 15 GPM, Vacuum Pump Flow Rate: 13 CFM, Heater Capacity: 18KW @ 15wsi, Motors: Electric, 480 VAC, 3 Phase; Other voltages are available, Plumbing: Inlet: 1 1/2 inch FNPT; Outlet: 1 1/2 inch FNPT, Approximate Dry Weight: 1300 lbs, Dimensions: 54 inchL x 31 inchW x 78 inchH,...